We combine expertise with innovation to deliver solutions for your product. Discover a selection of our competences. Like to know more? Contact us to discuss how we can support you!
Helvoet has co-developed several hybrid products and has a unique setup which enables to produce different materials all in-house and deliver everything out of one hand. This is achieved by over-moulding of a plastic part with with a custom-made rubber compound which bonds directly to the plastic.
Grinding
Molding
Post-Processed
Impeller
Impeller
The impeller is the "heart" of the fuel pump and Helvoet was one of the original manufactures of turbine injection molded and machined fuel pump impellers. Having shipped over 300 Million products in thermoset and thermoplastic since its first in 1993, Helvoet is the industry leader in this application.
Co-Development
Hybrid product
K+K
Bonded parts
Bonded parts
Bonding of rubber on metal or plastic by direct-bonding or with a bonding agent is one of Helvoet's specialities
Microfluidics
Microfluidics
A microfluidic chip can be considered a mini-laboratory and is certainly the future for point-of-care diagnostics and other applications. Helvoet offers polymer microfluidic components of highest quality.
Cleaning
Grinding
Metal to Plastic
Fuel Pump Housings
Fuel Pump Housings
Helvoet is the world's only supplier of phenolic housings machined with Pocket Grinding and single-slides grinding equipment. Component quantities are nearing 500 million since the first products rolled off the line in 1999.
Hybrid product
K+K
Molding
Membranes and Sealings
Membranes and Sealings
We manufacture a wide range of rubber and LSR membranes and sealings, adapting the material to the application requirements. It is also possible to integrate a sealing function in a structural part by k+k technology.
Vacuum Connector
Vacuum Connector
Mostly vehicles with diesel engines are executed with auxiliary vacuum pumps where a vacuum connector ensures that depression remains in the system at all times. With our own flexline assembly technology we offer a large variety of 100% tested vacuum connectors with check valves.
Assembly
Molding
Post-Processed
Grinding
Metal to Plastic
Molding
SCR Pump
SCR Pump
The SCR pump in thermoset is a typical example of substitution from metal to plastic. It is used to reduce the NOX for diesel engines and has to withstand urea (Ad Blue) for its function.
Metal to Plastic
Molding
Stator air-conditioning unit
Stator air-conditioning unit
The insulation mask products form the stator of an air-conditioning unit and are manufactured by injection molding of BMC (Bulk Molding Compound). Because of the light weight, high strength and high resistance to creep, BMC forms an excellent material for this application.
Rotor for radar system
Rotor for radar system
As metal replacement product a pvd coated drum is used in the automotive Advanced Emergency Braking Systems (radar system). Precise tolerances and specific reflection properties are required for this high safety part made of thermoset.
Cleaning
Metal to Plastic
Post-Processed
Grinding
Metal to Plastic
Post-Processed
Piston for brake system
Piston for brake system
This thermoset secondary piston is part of the TMC (Tandem Master Cylinder) brake system in automotive. It's a high security part with specific requirements on strength (450bar) and roughness tolerances over lifetime achieved by grinding.
Assembly
Molding
Post-Processed
Primary Packaging
Primary Packaging
Helvoet has been producing millions of veterinary syringes for decades and applies this knowledge to other primary packaging as well as drug delivery devices.
Valve block for gear box
Valve block for gear box
The valve block is a high precision as molded part in thermoset material. After the assembly of 4 valves it is used in the DSG gear box (Direct Shift Gear). Precise tolerances, strength and contamination requirements are key to the manufacturing process.
Cleaning
Metal to Plastic
Molding
Assembly
Co-Development
Post-Processed
Cartridges
Cartridges
Cartridges are amongst the best examples of products where we can put our broad tool box to work. Different materials, combining processes, handling of filters, foils or microfluidics combined with functional testing and zero-defect assembly.
Assembly
Molding
Post-Processed
Tubes & Plugs
Tubes & Plugs
Product ensures the stability of diabetes test strips over life time - parts are moulded, filled and sealed, ensuring a moisture tight seal during storage and usage.
Blood warming cartridge
Blood warming cartridge
This part warms the blood of the patient in a trauma condition improving the chance of recovery. By performing a good FMEA study Helvoet optimized the risk reduction and the investments leading to the best product quality.
Co-Development
Hybrid product
Assembly
Cleaning
Co-Development
Medical Devices
Medical Devices
Helvoet is able to manufacture your medical device with all its different molded parts and bought in components. If required we also handle sterilization and packaging in its final individual packaging.
Assembly
Cleaning
Molding
Dosing Systems
Dosing Systems
Accurate dosing systems are build up of accurate parts. We produce dosing devices for several customers in the food and beverage markets and integrate functional testing methods to secure nothing but the best quality.
